Stratasys stopped supporting your Fortus. We didn't.
The Fortus 400mc went off OEM service in December 2024, and owners are being steered toward trade-ins. Your machine is paid for and still productive. Pivot AM will keep it running for at least the next five years.
- Maintenance contracts
- On-demand repairs
- Parts the OEM won't sell
- Upgrades and material unlocks
Why keeping your T-Class system can be the smarter move
It's already paid for
Most 360mc and 400mc systems are fully depreciated and built into your workflow. Replacing one means a capital request, downtime, and retraining.
You keep your build control
Operators moving to the 450mc often lose the fine control they rely on: tuning supports, optimizing sparse fill, and cutting material and build time.
More materials, no new machine
A Pivot material unlock opens the full range of compatible thermoplastics, typically for about $1,000.
Independent, long-term support
Maintenance contracts, on-demand repairs and lower-cost materials, with no OEM dependency.
What we can do for your 360mc or 400mc
| Service | What it does for you |
|---|---|
| Maintenance contracts | Scheduled PM, phone support and priority emergency service (SELECT, CHOICE or PRIME) |
| On-demand repair | One-time emergency repair on a time-and-materials basis |
| Depot repair | Drive blocks, computers and printheads repaired at our shop and returned |
| Component-level parts | Individual parts like drive block motors, instead of whole assemblies |
| Material unlock | The full material set the hardware supports, for one fee |
| 360mc → 400mc conversion | Larger build volume and full-size build platform |
| Material bay upgrade | Expand from 2 material bays to 4 |
| Argyle FDM material | Stratasys-compatible filament at a lower cost than OEM |
"The motor isn't available. Buy the whole drive."
A 400mc owner asked Stratasys for a replacement drive block motor. They were told the motor isn't sold separately, only the complete filament drive, and that the 400mc is off service.
Buy the complete filament drive assembly. The machine is off service.
We sell just the motor, and we'll be supporting these machines for years to come.
Common questions
Is it safe to keep running an "end of life" Fortus?
How long will Pivot support the 360mc and 400mc?
Should I trade in for a 450mc instead?
Can you service Classic as well as T-Class machines?
Don't replace your Fortus. Optimize it.
Tell us your model, its condition and what you want it to do, and we'll show you your options.
Stratasys® and Fortus® are trademarks of Stratasys Ltd. Pivot AM Service is an independent service provider and is not affiliated with Stratasys.
