Skip to content
Mon - Fri: 8AM - 5PM207 SE 16th St. Pella, IA 50219
Facebook page opens in new windowX page opens in new windowLinkedin page opens in new windowRss page opens in new windowYouTube page opens in new window
Pivot AM Service | AM and RP Equipment Maintenance and Repair
Service, Support, Appraisals for Additive Manufacturing Equipment
Pivot AM Service | AM and RP Equipment Maintenance and Repair
CALL US TODAY!
1-641-780-5686
  • Home
  • About Us
    • Our Company
    • Testimonials
    • Careers
    • Sponsorships
  • Our Services
    • 3D Printer Maintenance
      • On-Site 3d printer repair services by highly trained technician
      • Fortus® Maintenance
        • DEPOT REPAIR
        • On-site Plans
        • F900 and Fortus Upgrades: Onboard air
      • SLA Maintenance
      • SLS Maintenance
      • PJP Maintenance
    • 3D Printer Appraisals
    • 3D Printer Installation
    • Relocating a 3D Printer
    • 3D Printer Consulting
    • Fortus Material Unlocks
  • Machine Sales
    • Lynxter Silicone 3D Printers
    • ACE SLA Post Processing Wash Tank
    • Refurbished Stratasys
    • Refurbished Ancillary Equipment
    • Refurbished 3D Systems
    • Rent Production Capacity from Pivot AM
  • Material Sales
    • FDM Material
    • Accura SLA Material
    • DuraForm SLS Material
  • FAQs
  • Our Blog
  • Contact Info
Search:
SEARCH
  • Home
  • About Us
    • Our Company
    • Testimonials
    • Careers
    • Sponsorships
  • Our Services
    • 3D Printer Maintenance
      • On-Site 3d printer repair services by highly trained technician
      • Fortus® Maintenance
        • DEPOT REPAIR
        • On-site Plans
        • F900 and Fortus Upgrades: Onboard air
      • SLA Maintenance
      • SLS Maintenance
      • PJP Maintenance
    • 3D Printer Appraisals
    • 3D Printer Installation
    • Relocating a 3D Printer
    • 3D Printer Consulting
    • Fortus Material Unlocks
  • Machine Sales
    • Lynxter Silicone 3D Printers
    • ACE SLA Post Processing Wash Tank
    • Refurbished Stratasys
    • Refurbished Ancillary Equipment
    • Refurbished 3D Systems
    • Rent Production Capacity from Pivot AM
  • Material Sales
    • FDM Material
    • Accura SLA Material
    • DuraForm SLS Material
  • FAQs
  • Our Blog
  • Contact Info

Yearly Archives: 2026

You are here:
  1. Home
  2. 2026

It’s Just a Box: Why the ACE SLA Wash Tanks’ Simplicity Costs Less

SLA, TechnologyBy Richard SmeenkNovember 10, 2026

And Why Other Major Machines Can’t Last 20 Years Without Major Maintenance. The short answer The ACE SLA wash tank from Pivot AM has the lowest lifetime cost of ownership of any large-format SLA wash system because there is almost nothing in it to break. It is a fully pneumatically controlled and actuated metal tank:…

Breakaway Support for Stratasys FDM: EasyBreak vs. BST

Fortus MachinesBy Richard SmeenkNovember 5, 2026

Breakaway Support for Stratasys FDM Printers: FDM EasyBreak vs. BST Breakaway Support Short answer: If you want breakaway support on a Stratasys FDM printer, you have two options. Stratasys’ new FDM EasyBreak software feature makes soluble support (SR-30, SR-100, SR-110) easier to snap off. Pivot AM’s BST breakaway support is a HIPS material that peels…

Milestone worth celebrating: Pivot AM just sold our 200th piece of 3D printing equipment!

Business, Fortus Machines, SLABy Richard SmeenkNovember 2, 2026

Pivot AM just sold our 200th piece of 3D printing equipment. Over 9 years as a company, that’s included refurbished FDM, SLA, and SLS machines, plus new technologies like our ACE SLA wash tanks and Lynxter silicone 3D printers. At heart we’re a service company. Our team’s been fixing and maintaining industrial printers for 3+…

Lynxter OVERTIME: What 36x Longer Print Time Means for Silicone 3D Printing

Silicone 3D Printing, TechnologyBy Richard SmeenkOctober 27, 2026

In short: OVERTIME is a new, patented add-on for the Lynxter S300X – LIQ21 | LIQ11 silicone 3D printer. It extends how long two-part silicone can stay printable inside the print head, giving up to 36x more printing autonomy. That means you can use the printer’s full build volume in a single job, print larger…

Drone Dominance Program and Scaling 3D Printing

Fortus Machines, Used 3d PrintersBy Richard SmeenkOctober 23, 2026

What is the Drone Dominance Program? The Drone Dominance Program is a two-year, $1.1 billion US Department of War program to buy small, low-cost attack drones from American manufacturers. It carries out Executive Order 14307, “Unleashing American Drone Dominance,” signed in June 2025. The Defense Innovation Unit (DIU) and the Test Resource Management Center run…

Section 849: What it Means for DoD 3D Printing

Fortus Machines, Used 3d PrintersBy Richard SmeenkOctober 21, 2026

Section 849 Takes Effect December 18: What It Means for DoD 3D Printing and How Pivot AM Can Help On December 18, 2026, Section 849 of the FY2026 National Defense Authorization Act takes effect. From that date, the Department of Defense can no longer procure additive manufacturing machines, related equipment, or associated services from companies…

Lynxter at Formnext 2026: See the S300X Silicone 3D Printer in Frankfurt

Events, International, TechnologyBy Richard SmeenkOctober 16, 2026

Heading to Formnext? Stop by Lynxter Formnext 2026 is opening in Frankfurt on November 17th and running to November 20th. Pivot AM won’t be in attendance this year but our partners over at Lynxter will be and we encourage anyone attending to stop by their booth. The Lynxter S300X is one of the few industrial…

Onboard Filament drying for Fortus and all F Series machines

Fortus MachinesBy Richard SmeenkSeptember 18, 2026

Onboard Filament Drying for Stratasys Fortus: How to Get Filament Moisture Control on the Machine You Already Own Short answer for anyone searching for a fast fix: Stratasys built an integrated, regenerative material drying system into its new F870 large-format FDM printer to keep filament moisture-free during long, unattended production runs. You do not need…

Why Your SLA Printer Is Failing, and What to Replace

3D Printer MaintenanceBy Keni QeretailAugust 26, 2026

If your SLA machine has started producing bad parts, throwing errors mid build, or just quietly getting worse over the last few months, you’re not imagining it. These machines wear in predictable ways, and most of what goes wrong on a legacy 3D Systems SLA printer comes down to a handful of components that simply…

What 3D Printer Maintenance Really Costs, and Repair vs Replace

3D Printer MaintenanceBy Keni QeretailAugust 26, 2026

Every industrial 3D printer owner eventually asks the same question. The machine needs a repair, or a maintenance contract is up for renewal, and the number on the quote makes you wonder whether it’s still worth keeping the thing running at all. There’s no single dollar figure that answers that question honestly, because it depends…

→123→
© 2026 Agile Manufacturing Ltd dba Pivot AM Service, All rights reserved. | Designed by QeRetail
Go to Top